Digital Input 8 channel DC - DI8DC
The “Digital Input 8 channel DC” Card provides 8 contact closure inputs. Applications: end course, push buttons, voltage detection, ...
• Voltage range: 12 to 48 VDC
• Voltage rating: 60 VDC
• Common Ground (source)
• Threshold level:voltage: ±5 VDC
• Turn on time: 5 mS
• Turn off time: 5 mS
• Overvoltage protection: ±60 V
• 4 KV Transient isolation with backplane
Digital Output 8 channels Sink - DO8SK
The “Digital Output 8 channels SinK” card provides 8 common ground outputs. Main applications: Low Power Solenoid, LED, lamp, Relay, High speed and repetitive commutation.
• Common ground (Sink)
• Voltage range: 5 to 30 VDC
• Voltage rating: 50VDC
• Maximum current driver: 0,3A /30 VDC (resistive load)
• Protected by resettable Fuses
• 4 KV Transient isolation with backplane
Analog Input 8 channel Ratiometric - AI8RA
The “Analog Input 8 channel Ratiometric” converter card provides 8 analog ratiometric inputs. Main applications: Potentiometers reader, analog detection, sensors, ...
• Resolution: 8 bits
• Sampling rate:
• Voltage reference available on pin #1
• Input voltage range: 0 to 5 VDC
• Input voltage protection: ±30 VDC
• No Isolation with the backplane
Digital Output 4 Power Relays - DO4PR
The “Digital Output 4 channels Power Relay” card provides 4 “dry contact” relays.
• Rated relay switching : 5A at 130 VAC (resistive load)
• Turn on time: 5 mS
• Turn off time: 2 mS
• 4 KV Transient isolation with backplane
• 1KV Transient isolation Relay to Relay
Analog Output 8 channel Digital to Analog - AO8DA
The “Analog Output 8 channel Digital to Analog” converter card provide connections for Octal analog output. Main applications: CV generation, 0-10V Dimmer, Motor control, ...
• DAC resolution: 8 bits
• Output voltage range: 0 -10 VDC
• Maximum current driver: 4 mA/channel
• Short circuit protection: Indefinitely
• Overvoltage protection: ±30 V
• No Isolation with the backplane